/ Articles

How to Create Microlearning Courses

November 12, 2026

← Back to Articles

An instructor in a yellow hard hat demonstrates a welding task while trainees in aprons and masks watch

Most teams that set out to build microlearning start by cutting a long course into short videos. The result is shorter, but it asks the same thing of people: watch, then click next. Nobody has to pull anything from memory, so less of it is there a month later.

A course built for recall works differently. Each item tests one objective, makes people pull the answer from memory, explains why it is right, and comes back over time. Here is how to create microlearning courses that way, so they hold up on shift.

Table of Contents

Before You Build: Choose What Goes In

A microlearning course is small by design, so the hard choice is what to leave out. Start from measured data on the knowledge your people are most likely to lose and most costly to get wrong. A training needs assessment tells you who needs what; training content development covers how gap data decides what to build and what to cut.

By the time you start the course, you should have a short list: the procedures, decisions and facts a specific role must recall without looking them up. Everything below assumes that list exists.

How to Create Microlearning Courses in Five Steps

The steps below are this article's method. The two learning-science findings it draws on (retrieval and spacing) come from studies with students, and the workplace steps built on them are our suggestions, not tested protocols.

Step 1: Scope one objective per item

Each item in the course should test one thing a person must be able to do or decide. Write the objective as an action:

  • Too broad: "Understand the chemical spill procedure."
  • One objective: "Choose who to notify first when a spill reaches a floor drain."

One objective per item keeps each piece short without stripping out the reasoning. It also makes the results readable later: if an item covers three ideas and people miss it, you will not know which idea failed.

A practical test: if you cannot write a single question whose answer shows the objective was met, the objective is still too broad. Split it.

Step 2: Write questions that make people retrieve

The core of the course is the question, not the content screen. In a classic experiment, students read prose passages and then either restudied them or took memory tests on them. Testing produced "substantially greater retention than studying" on the delayed tests, even though restudying made students more confident (Roediger and Karpicke, 2006, Psychological Science). Their conclusion: "Testing is a powerful means of improving learning, not just assessing it."

Retrieval practice means answering from memory instead of rereading. For a workplace course, that suggests:

  • Ask for the decision, not the definition. "A coworker is unresponsive inside a tank. What do you do first?" asks more of people than "What is a permit space?"
  • Use formats that require recall. Ordering the steps of a procedure, selecting every correct option, or typing a short answer ask for more than true/false.
  • Write wrong options people actually choose. The best distractors come from the mistakes you see on the floor.

Blank Slate's own question data adds a point about difficulty.

Amy Smith, PhD, Blank Slate's Chief Scientific Officer, compared the easiest and hardest questions in its database. In How to ask hard questions, she reports that "Hard questions focused heavily on procedural knowledge and situational judgment" and often put the person in a decision-making role. Easy ones leaned on formats such as true/false and multiple choice. A course of easy questions can show high scores and still leave the procedural gaps open.

Step 3: Put the reason in the answer

After each attempt, show the correct answer and one or two sentences on why it is correct. The "why" is what lets someone handle the version of the situation that your question did not describe. Keep it tied to your own procedure or policy, and name the document it comes from so people know where to check.

This step is our suggestion; the Roediger and Karpicke tests were given without feedback.

Step 4: Sequence and space the items

Order items so that foundations come first. A person should meet "which energy sources does this machine have" before "in what order do you isolate them." Group items by task, not by the chapter order of the original course.

Then plan for every item to come back: a course that shows each item once is a short lecture. A meta-analysis of 317 experiments on distributed practice (Cepeda et al., 2006, Psychological Bulletin) found that two things work together: the gap between study sessions and how long you need to remember. The longer people must remember, the longer the gap that gives the best retention. The review did not test workplace courses; our inference for procedures people must recall months from now is to bring items back over those months, with longer gaps as time goes on.

Spaced repetition means reviewing material at intervals over time. Combined with retrieval practice, it becomes spaced retrieval. Once the course exists, how often to send it and how to avoid training fatigue are decisions for your microlearning strategies.

Step 5: Check that it worked

Completion tells you the course was delivered. To see whether it worked, track:

  1. First-attempt accuracy per item. The first answer, before any feedback, is the honest read of what people knew.
  2. Accuracy weeks later. A score taken right after the course says little about recall on shift two months from now.
  3. Items nearly everyone misses. These usually point to a confusing question or a gap the original training never covered. Rewrite the question or fix the source content.
  4. Items nearly everyone gets right from day one. Retire them or make them harder; they cost time and teach little.

A Shortened Lecture vs a Course Built for Recall

Design choiceShortened lectureCourse built for recall
Unit of contentA video or slide clipOne objective, tested by one question
What the learner doesWatches, then clicks nextAnswers from memory, then sees the reason
Question styleA quiz at the end, often true/falseDecisions, ordered steps, select-all
How often items appearOnceAgain, with longer gaps over time
What you measureCompletion and an end-of-module scoreFirst-attempt accuracy per item, over weeks

The left-hand column is easier to build. The right-hand column is the five-step method above, which draws on the retrieval and spacing findings in Steps 2 and 4.

Where Blank Slate Fits

Blank Slate is a cognitive-readiness platform built on AI-optimized spaced retrieval. It works on top of the training content an organization already has, and its AI schedules each question for the point where a person is likely to forget it. People answer in short (about 60-second) sessions three or four times a week, adding up to a few minutes a week. Its True Knowledge Level™ shows what a person or team knows right now.

The evidence runs from university classrooms to a military training pipeline. In a randomized controlled trial with university students, Blank Slate's spaced retrieval matched daily review's retention in about one-third of the study time (McHugh et al., 2021). In a study of US Air Force pararescue trainees using Blank Slate, presented at I/ITSEC 2023, accuracy on the app's questions rose from 67% to 81% over 16 weeks. Trainees averaged about 100 seconds of use a week (I/ITSEC 2023).

Blank Slate does not replace required training hours, a refresher course or hands-on practice. It reinforces and measures what people retain between them, and it sits alongside your LMS, which records what people completed (see how it differs from an LMS). The how it works page shows the setup, and our piece on interactive training explains why even engaging content fades without reinforcement.

Where to Start

Pick one high-risk procedure and build ten items for it using the five steps. Run them for a month and look at first-attempt accuracy by item. If you do not yet know which procedures to start with, a Knowledge Gap Audit shows where your team stands before you build.

Frequently Asked Questions

How many objectives should one course item cover?

One. An item that tests a single decision or procedure step stays short and tells you exactly what was missed when someone gets it wrong. If you cannot write one question that proves the objective, split the objective.

Which question types expose the most gaps?

Questions that make people recall and apply the answer. Ask what to do in a realistic situation, ask people to order the steps of a procedure, or ask them to select every correct option. Simple true/false items are easy to answer and expose fewer gaps.

How do you know if a short course worked?

Look at first-attempt accuracy on each item, and look again weeks later. Completion rates and end-of-module scores show delivery, not what people will recall on shift. Items most people still miss need a clearer question or better source content.

Does a short course replace mandated hours or refreshers?

No. A microlearning course can reinforce what people learned in required training, but it does not replace mandated hours, refresher courses or hands-on practice. Blank Slate works the same way: it runs alongside your LMS and classroom training and measures what people retain.

Your team finished the course. What do they still know? A Knowledge Gap Audit is free: your team answers a short assessment in the browser, and you get a one-page readiness snapshot of what is retained, what is slipping, and where to reinforce first.

Request a Knowledge Gap Audit

More Articles